| The car's tires are equivalent to the shoes on our feet. There is a good pair of good shoes that can make us sprint, but if the shoes go wrong, it may be uncomfortable to walk, or it may wrestle or sprain our feet. Car tires will inevitably be punctured by sharp objects. If you burst a tire, do you know what to do? Here are some tips for you: |
First aid: gun repair The most common way to repair a tire is to insert a special rubber strip in the punctured part of the tire. The master of the tire repair shop usually refers to it as a gun repair. The biggest advantage of this method is that it is fast and convenient, it only takes a few minutes, and it does not need to pry the tire from the steel rim. Usually only as a temporary remedy.
Plugging type: paste patch There is another way to repair the tire is sticky patch. The so-called stick repair is to remove the injured tire from the steel ring, find the wound, and then paste the special tire repair rubber from the inner layer of the tire to complete the leak repair. The advantage of this method is that large wounds can be repaired, but the disadvantage is that it is not durable enough. After a period of flooding and high-speed operation, air leakage will occur again at the repaired place.
Final style: fire repair The most thorough tire repair method is often called fire repair. Fire repair also has to pry off the tire, then attach the special raw film to the wound, and then bake the wound with a baking machine until the raw film is completely fitted to the tire. The advantage of fire supplement is that it is very durable, so you don't have to worry about repeated leaks. However, it also has disadvantages, that is, the technical requirements are high during construction, because once the fire control during baking is not good, it is likely to burn the tire and severely deform it. In this way, damage to the tire may be It's big.
Professionals point out that there are various methods of tire repair, but they are not everything. If there is a wound greater than 1 cm in the tire wall (ie, the tire side), or the tire crown is punctured by objects such as steel bars, which causes a large loophole, it is generally best to replace the tire with a new one. Because such a tire is not only difficult to repair, the effect after repairing cannot be reassured, simply let it retire.
As for yourself, there are many automatic tire repair agents on the market that have some effects, but they also have strong limitations. For example, if the leaked tires have leaked air, it will be difficult to work. The biggest drawback of this tire repair agent is that it is very corrosive. Whether it is steel rims or alloy rims, there will be greater damage over a long period of time. The direct result of this damage is that the steel rim and the tire seal are not Severe air leakage.